6 Ways You Can Unclog a Toilet Bowl Without a Plunger
Get things in working order with these mess-proof ideas.
Plunger Alternative: Start With Dish Soap
Plunging a clogged toilet is no fun, but there’s a better way. To unclog a toilet without a plunger, head to the kitchen for some dish soap. The slippery soap should help lubricate the clogged pipe and allow the lodged debris to slide down more easily.
Pour about a half-cup into the toilet. If you’re out of dish soap, chop a bar of hand soap into small chunks and drop the pieces into the toilet. If none of these unconventional methods work, here’s our fool-proof guide for how to unclog a toilet.
Plus, Check Out the Best Toilet Paper for Your Plumbing
We tested toilet paper breakdown and this is what happened. This is the best toilet paper for your plumbing.
Add Hot Water
If dish soap alone doesn’t do the trick, adding water might move things along. Fill a bucket with hot bath water (boiling water could cause a porcelain toilet to crack) and pour the water into the toilet from waist level. The force of the water could dislodge whatever is causing the clog.
DIY a Drain Snake Using a Wire Hanger
A more severe blockage could require manually moving the item. To do this without a plunger, unravel a wire coat hanger until it’s straight. Push one end of the wire into the clogged area. Prod the debris until it becomes free and flows down the drain. Voila!
Plunger Alternative: Baking Soda Mixture
As an alternative to using dish soap and no plunger, try this all-natural solution. Pour one cup baking soda and two cups vinegar into the toilet. Allow it fizz for a half hour. If clog doesn’t dissipate, try the hot water trick. And while you’re in the bathroom, check out these 13 tips on how to clean your bathroom faster and better.
Use a Plastic Bottle to Create Water Pressure
Warning: This unclogging trick could get messy.
Start by removing as much water from the toilet bowl as possible; you can do this by repeatedly filling a small container with toilet water and pouring the water into a bucket. Next, fill a large plastic bottle with warm water.
Place your thumb over the top of the bottle and fit the top end of the bottle into the outlet at the bottom of the toilet. (You’ll want to wear rubber gloves for this step.) Remove your thumb and squeeze the bottle so the water inside shoots down the pipe. The added pressure could dislodge whatever was causing the clog.
Check out these 100 plumbing goofs and other scary stuff!
Plunger Alternative: Squirt Gun Toilet Drainer
If you decide to drain your toilet bowl before dealing with the clog, here’s a unique tip to get the water out.
“When you’re repairing or replacing a toilet, you need to remove all the water. Simply shutting off the water supply and flushing won’t do it. A sponge works, but it’s kind of slow. So I use an old squirt gun to suck the water out and squirt it into a bucket, leaving just the last few drops to sponge out.” —Reader Dale Conklin.